Version | Date | Who | Description ---------|--------------|--------|----------------------------------- V0.1.5.0 | 2024-02-20 | DM | enhancements and bug-fixes V0.1.4.0 | 2023-06-27 | EB | enhancements and bug-fixes V0.1.3.0 | 2022-02-09 | EB | Versioning, usage for 'Template' V0.1.2.0 | 2022-01-28 | JZ | Versioning V0.1.0.3 | 2020-11-06 | AGR | SPI and I2C V0.1.0.2 | 2020-09-28 | AGR | GCC Note V0.1.0.1 | 2020-09-28 | AGR | Versioning V0.1.1.0 | 2020-09-22 | AGR | Versioning V0.1.0.0 | 2020-09-07 | AGR | NAE, MCP and FPU V0.0.5.0 | 2019-12-17 | AGR | Header changes V0.0.4.10 | 2019-12-16 | AGR | XPIC Hotfix V0.0.4.9 | 2019-12-05 | AGR | SPI and UART Hotfix V0.0.4.8 | 2019-10-07 | AGR | CMSIS Temperature Support V0.0.4.7 | 2019-05-14 | AGR | CMSIS Template ld V0.0.4.6 | 2019-05-02 | AGR | TIM Hotfix V0.0.4.5 | 2019-04-25 | AGR | Info Page Fix V0.0.4.4 | 2019-04-17 | AGR | Production Tested Chips V0.0.4.3 | 2018-12-18 | AGR | End of year V0.0.4.2 | 2018-11-22 | AGR | Trading Show Beta
### V0.0.4.1 | 2018-11-15 | AGR | First Hotfix Round V0.0.4.0 | 2018-11-13 | AGR | Final Silicon Pre-Beta V0.0.3.0 | 2018-07-20 | AGR | DMA Pre-Beta V0.0.2.0 | 2018-03-01 | AGR | CAN Pre-Beta V0.0.1.0 | 2018-01-26 | AGR | Pre-Beta V0.0.0.3564 | 2018-01-16 | AGR | Alpha V0.0.0.3452 | 2017-11-06 | AGR | Pre-Alpha ### V0.1.4.0 Versioning, some enhancements due requests - DRV_LOCK/'DRV_UNLOCK' introduced different solution for these macros 'as new default' in 'netx_drv_conf.h', 'netx_drv.h', not using LDREX/STREX instructions Note: these macros are used/included by 'all drivers' - ADC changed config data type of DMA Base Address - ADC fixed wrong check for selected sequencer in DRV_ADC_Start - TIMER fixed DRV_TIM_Init not returning DRV_NSUPP when DMA mode is selected - DIO fixed bug in DRV_DIO_ChannelSetMode where reconfiguring of GPIO capture mode did not work - CMSIS added feature 'using .5.0 ** Bug ptTim->ulSubID SPI RefillLevel SPI device in IRQ mode stuck with DRV_BUSY when sending small amount of data with low SPI frequencies DIO - Reconfiguration of the GPIO capture mode with DRV_DIO_ChannelSetMode does not work correctly I2C - Watermark issue when receiving data as a slave UART - DRV_UART_ABORT not working correctly in DMA mode Implement writing of ADC Sequencer command register once per job with all parameters UART - Transmission does not work properly when watermark level is 1 in DMA mode UART - ullFrameStartTick for timeout is not reset in DRV_UART_GetChar and DRV_UART_PutChar Problem when using a SQI interface from app side in standard SPI full-duplex mode SQI Chip Select hardware mode issue Function DRV_I2C_Abort() returns only negative result DRV_I2C_MasterReceive() function is no more useable if returns with timeout in polling mode
** New Feature Test SPI slave functionality in SQI capable SPI driver Uart driver: add support to 6.25M baudrate Trimmed ADC_VREF for low-level driver of temperature sensor '### V0.1.3.0 Versioning, note on some driver-code - ADC added more description-text in .c and .h file - SPI introduced a fix for getting SQI-Mode 'using DMA' working ### V0.1.2.0 Versioning - version with updated wscript ### V0.1.0.3 SPI and I2C - SPI fixed size correction - I2C missing clr added - DMAC added the falsely removed align. Note does still not disapear. ### V0.1.0.2 GCC Note - DMAC Another approach to the note regarding packed bit-fields in gcc 4.4 increased the amount of notes, so it was reverted again ### V0.1.1.0 Versioning - Tagged the wrong version ### V0.1.0.0 NAE, MCP and FPU - CMSIS FPU support added - CMSIS NAE in linker scripts is correctly placed now - CMSIS License of linker scripts has changed - WAF modified configuration struct - DMAC abort now disables the device before waiting for the active flag to go down - I2C Refill Level was added - I2C Clear is now functional - I2C get state now copes with missing state parameter - SPI Abort now also for polling mode - SPI Refill Level was added - SPI added assert - SPI fixed size correction - UART Abort fixed** Change UART Baud Rate Mode Calculation netX 90 regdef update due to ADC register description Change ADC software default value for tt_add to 10
|