Version |       Date      |  Who  | Description
---------|--------------|------|-----------------------------------
V0.1.5.0 | 2024-02-20 | DM | enhancements and bug-fixes
V0.1.4.0 | 2023-06-27 | EB | enhancements and bug-fixes
V0.1.3.0 | 2022-02-09 | EB | Versioning, usage for 'Template'
V0.1.0.3 | 2020-11-06 | AGR | SPI and I2C
V0.0.5.0 | 2019-12-17 | AGR | Header changes
V0.0.4.8 | 2019-10-07 | AGR | CMSIS Temperature Support
V0.0.4.7 | 2019-05-14 | AGR | CMSIS Template ld
V0.0.4.3 | 2018-12-18 | AGR | End of year
V0.0.4.2 | 2018-11-22 | AGR | Trading Show Beta

### V0.1.5.0

** Bug

• ptTim->ulSubID

• SPI RefillLevel

• SPI device in IRQ mode stuck with DRV_BUSY when sending small amount of data with low SPI frequencies

• DIO - Reconfiguration of the GPIO capture mode with DRV_DIO_ChannelSetMode does not work correctly

• I2C - Watermark issue when receiving data as a slave

• UART - DRV_UART_ABORT not working correctly in DMA mode

• Implement writing of ADC Sequencer command register once per job with all parameters

• UART - Transmission does not work properly when watermark level is 1 in DMA mode

• UART - ullFrameStartTick for timeout is not reset in DRV_UART_GetChar and DRV_UART_PutChar

• Problem when using a SQI interface from app side in standard SPI full-duplex mode

• SQI Chip Select hardware mode issue

• Function DRV_I2C_Abort() returns only negative result

• DRV_I2C_MasterReceive() function is no more useable if returns with timeout in polling mode

** New Feature

• Test SPI slave functionality in SQI capable SPI driver

• Uart driver: add support to 6.25M baudrate

• Trimmed ADC_VREF for low-level driver of temperature sensor

• In function DRV_ADC_Start() wrong check for selected sequencer

** Change

• UART Baud Rate Mode Calculation

• netX 90 regdef update due to ADC register description

• Change ADC software default value for tt_add to 10

• untested version

• documentation incomplete