Panel |
---|
bgColor | #ffffff#FFFFFF |
---|
titleBGColor | lightgrey |
---|
title | Getting Started |
---|
|
First StepsFor a detailed instruction how to set up your netFIELD Device IO-Link Wireless Master | - Business Model Section |
---|
Column |
---|
|
|
Direct Selling - Preloaded communication module
The Device is sold as a product directly by Hilscher HQ, by the distributors and by the subsidiaries.
You can use netRAPID 90 as companion solution in the style of a communication module to be connected with a host CPU.
In this scenario, netRAPID 90 comes preloaded with a communication protocol and is ready to use.
For the companion solution, no netX licence or support contracts are required.
In the preloaded version, the pin assignment is fixed to certain functionality:
Real-Time Ethernet or Fieldbus SlaveSPI interface to the host CPULEDs (COM0,
COM1, Link/Activity 0/1)SYNC0/1UART Diagnosis+3.3V, GND Column |
---|
|
You can use netRAPID 90 in a stand-alone solution without any host.
This use case can be considered as nearly identical to the direct use of a netX 90 chip.
The pin assignment is flexible and can be adapted by the customer according to his or her needs by using the tool netX Studio CDT.
For this approach, a netX license and support agreement as well as the purchase of appropriate protocol stacks are required.
In this scenario, the netRAPID 90 is provided as a pure hardware-platform.
Option:
To reduce production costs at the OEM, Hilscher optionally offers the service to supply netRAPID 90 preloaded with customer specific content.
For further details about this service please contact the Hilscher sales team.
Panel |
---|
bgColor | #FFFFFF |
---|
titleBGColor | lightgrey |
---|
title | Getting Started |
---|
|
|
Step | Descrition |
---|
Requirements and preparation | - Prepare the device installation and commissioning according to the requirements descriptions on hardware, system and software.
- Prepare the required mounting tools.
|
Safety | Read the mounting instructions and the safety instructions on connecting and commissioning the device.Disconnect the system to which the device will be mounted from the power supplyplease follow the chapter "Getting Started" in the User Manual.
→ …\Documentation\User_Manuals\...
Mounting
- Mark the positions to fasten the device with screws and cut the M4 holes.
- Fasten the device with the screws.
- Ground the device.
- Mount all three SMA antennas.
Connecting and booting
- Connect the Ethernet M12 cable to the NFD-3090-PNS-IOLM\W device and to the PLC (PROFINET IO-Controller).
- Connect the Ethernet M12 cable to the NFD-3090-EIS-IOLM\W device and to the PLC (EtherNet/IP Scanner).
- Connect the +24 V DC SELV or PELV power supply to the NFD-3090-PNS-IOLM\W device
- Connect the +24 V DC SELV or PELV power supply to the NFD-3090-EIS-IOLM\W device.
- Connect the +24 V DC SELV or PELV power supply to the sensor/actuator.
- Switch on the power supply units of the device and of the sensors/actuators.
Commissioning PROFINET IO Device
- Configure the PROFINET IO-Controller: Import the GSDML file:
...\Firmware_&_EDS\DeviceDescription\Profinet\... GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-
20200624- EXPERT-20210707.xml
This file is to be used if settings of the „Wireless Master Parameters“ are made using the configuration software of the PROFINET IO-Controller.
...\Firmware_&_EDS\DeviceDescription\Profinet\... GSDML-V2.35-HILSCHER-NETFIELD-WIRELESS-
NOCONFIG20200624- 20210623.xml
This file is to be used if settings of the „Wireless Master Parameters“ are made using the netFIELD Web Server. - Create the configuration project with PROFINET IO-Controller and PROFINET IO-Device, select the modules and submodules and set the parameters.
- Configure the IO-Link Wireless Master NFD-3090-PNS-IOLM\W using the Web Server.
- Configure the port parameters via the PROFINET IO-Controller or using the Web Server.
- Configure the IO-Link sensors/actuators.
Commissioning EtherNet/IP Adapter
- For the first commissioning, the NFD-3090-EIS-IOLM\W device requires a DHCP server.
- Configure the EtherNet/IP Scanner: Import the EDS file:
HILSCHER_NETFIELD_V1.1_IOL_W- ...\Firmware_&_EDS\DeviceDescription\EtherNetIP\... HILSCHER-NETFIELD-WIRELESS-V2.1.EDS
- Create the configuration project with EtherNet/IP Scanner and EtherNet/IP Adapter, select the connection and set the parameters.
- Configure the IO-Link Wireless Master NFD-3090-EIS-IOLM\W using the Web Server.
- Configure the port parameters via the EtherNet/IP Scanner or using the Web Server.
- Configure the IO-Link sensors/actuators.
Panel |
---|
bgColor | #ffffff |
---|
titleBGColor | lightgrey |
---|
title | Download |
---|
|
Firmware: netRAPID90 Firmware 2018-08-1 - BETA.zip
netXStudio CDT: netX Studio CDT V1.0610.1.2808 x86 Setup - netRAPID90 only - BETA.zip
Communication Sutio, Device Explorer, Device Library: Communication Studio, Device Library & Device Explorer - BETA.zip