Q
Could you provide information about netX ASIC production packaging option Tape and Reel?
A
Further information may be found in the standard EIA-481, which is used for taping.
| Package size | Tape size | Reel size | Quantity per reel | Outer reel empty pocket | Inner reel empty pocket |
|---|---|---|---|---|---|
| 144L LFBGA | Width: 24mm | Diameter: 13inch | 1500ea | ≥ 50ea | ≥ 50ea |
| 10x10x1.4mm3 | Length: 81m | Width: 24mm | Leader: 70cm | Trailer: 70cm |
Q
Could you provide information about netX ASIC production packaging option Pick & Place?
A
Hilscher provides netX90 ASICs in the P&P packaging listed below. Please note: Hilscher has also made small boxes of QTY.15 available for convenience when producing small prototype builds, however these will need to be manually placed in your own tray.
| BGABody Size | Quantity PocketsPer Tray | MatrixRow-Column | JEDECReference |
|---|---|---|---|
| 10 x 10 mm | 240 | 10 x 24 | CO-029AY |
Q
Could you provide information about Tape and reel shipping netX 90?
A
QUANTITY ON REEL AND ORIENTATION
Device | Package | Pin Count | Carrier Tape | Quantity per Reel | Pin 1 Orientation | EI481 Standard | |
Width | Pitch | 13“ | |||||
netX 90 | BGA 10 x 10 | 144 | 24mm | 16mm | 1000 | See Figure | Quadrant 1 |
- Reference for Tape & Reel see EIA-481 standard
- Device orientation nearby carrier hole left:
- Pin 1 located at upper left corner in user direction of unreeling
Legend EI481 Standard
Quadrant designations
1 = upper left
2 = upper right
3 = lower left
4 = lower right
See also...