Skip to end of banner
Go to start of banner

PROFINET IO-Device V5.6.0.8

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Release notes summary


Firmware Generation Status

ACTIVELATEST

Remarkrecommended for new projects
AvailabilitynetX 90 (tick)

Type

HOTFIX

Maintenance Status

MAINTAINED

Date

2024-09-12

Summary
  • Fix: issue with connection establishment for very large cyclic frames
  • Improve performance of cyclic data exchange
  • Update of AuthenticationManager 
Additional information


Maintenance Firmware

  • netX90 Usecase C requires Maintenance Firmware V1.3.0.0 or newer

  • netX90 Usecase A is compatible to Maintenance Firmware V1.1.0.x or newer

Note

Starting with firmware version V5.5.0.0, the firmware requires netX 90 with date code 1910 and later.
If a NXHX 90-JTAG is used, hardware revision 4 or higher is required. netX 90 samples (date code before 1910)
are no longer supported which is the case for NXHX 90-JTAG hardware revision 3 or lower.

Certification relevant issues

Getting issues...

Certification info

PNIO_Version: 2.43 (but only ConformanceClass A-C)

Intended TestBundle for this version of Protocol stack:

TestBundle VersionStateReleasedateLast day to request certification
according to this testbundle		Last day for testing
according to this testbundle
2.44 (August 2023)

ACTIVE

 

  

Changes in this version

type key summary resolution
Refresh


Downloads

Documentation, Migration Guide, firmware datasheets: 

Firmware:


  • No labels