netX 51 - Ethernet/IP Adapter - V4.0.0.0

netX 51 is used as a Host Controller in this case. A netX 51 based hardware like NXHX 51-ETM must be connected to any netX based companion chip which runs the Ethernet/IP Adapter V3. I.e. in this setup 2 netX chips are used: One as host, the second as companion chip.
In most cases, netX 51 will not be used as a host controller. Anyway this example might be helpful for users to understand the usage of EIS V3 stacks.

• simple EthernNet/IP configuration example
• extended EtherNet/IP configuration example
• please refer to the file "README.txt" for further information
• please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!

• EIS Simple Config - Changing Connection Parameters
• EIS Obtaining IP address by DHCP server

• first Release

• limited tests