Which ethernet protocol is used by atvise Builder to download the project to the netSCADA device?
A
During the distribution procedure atvise Builder uses the FTP ethernet protocol.
The connection will be established using the passive FTP mode. The atvise Builder initiates a connection using a PASV command over port 21 while the netSCADA device replies over a free port >1023.
You may use a standard FTP client such as Filezilla https://filezilla-project.org/ to get access to a netSCADA device alternatively.
In case you want to a establish a connection over Internet across a router to a local netSCADA device then you have to open or forward the port 21 and the specific netSCADA FTP reply port in order to allow a proper connection from remote.