Skip to end of banner
Go to start of banner

Overview netX 51 / 52 and netX 90

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Current »

SoC Features

netX 51netX 52netX 90
CommunicationApplication
Core Processor
ARM® ProcessorARM966E-S at 100 MHzARM966E-S at 100 MHzCortex-M4 at 100 MHz with MPUCortex-M4 at 100 MHz with MPU and FPU
Hilscher 32-bit RISCxPIC at 100 MHz with 2x 8 KB TCMxPIC at 100 MHz with 2x 8 KB TCMxPIC at 100 MHz with 2x 8 KB TCMxPIC at 100 MHz with 2x 8 KB TCM
Memory

SRAM

672 KB672 KB576 KB

64 KB

Flash

--1024 KB512 KB

Mask ROM

64 KB64 KB128 KB-
System
DMA Controller3 channels3 channels4 channels4 channels
WDC (ARM / xPIC)1 / 11 / 11 / 11 / 1
Timer (ARM / xPIC)2x 32-bit / 3x 32-bit2x 32-bit / 3x 32-bit3x 32-bit / 3x 32-bit3x 32-bit / 3x 32-bit
Network
xC Subsystem*22 channels2 channels2 channels-
IEEE 1588 SysTime2221
Fast Ethernet PHYDual-port, FX supportDual-port, FX supportDual-port, FX support-
100 Mbps LVDSPHY--Dual-port-
Ethernet MAC10/100 Mbps, MII10/100 Mbps, MII10/100 Mbps, MII
Peripheral
UART (Up to 3.125 Mbaud)331 (shared)3 (Up to 6.25 Mbaud)

SPI (Up to 50 MHz)

11-4
SQI (Up to 50 MHz)---2 (Master only, with SPI mode)

I2C (Up to 3.4 MHz)

2222
CAN 2.0B (Up to 1 Mbps)11-2
USB V1.1 (Up to 12 Mbps)DeviceDevice-

-

IO-Link V1.1 Controller

8 channels4 channels-8 channels
MLED (PWM tuned)--48
HIF PIO / PIO / GPIO / MMIOUp to 62 / - / 32 / 48Up to 62 / - / 32 / 40

- / - / 4 / -

Up to 41 / 29 / 8 / 18
Mixed Signal
Timer (PWM, IC/OC)32x 32-bit32x 32-bit4x 32-bit8x 32-bit
Motion PWM Unit---1
ADC SAR (12-bit, 2 Msps)--

2x 5 channels, 1x 3 channels, and 1x 2 channels

Quadratur Decoder---2
EnDat 2.2 (Master E6)--

-

2 (With RTM)
BiSS / SSI (Master BiSS C)---2 / 2
Host Interface
Parallel (DPM)8/16/32-bit (Read access min. 55 ns)8/16/32-bit (Read access min. 55 ns)8/16-bit (Read access min. 55 ns)Internal 32-bit
Serial (SPM)SPI/SQI (Up to 125 MHz/33 MHz)SPI/SQI (Up to 125 MHz/33 MHz)2x SPI/SQI (Up to 125 MHz/33 MHz)-
MAC (PHY Mode)MII (10/100 Mbps)MII (10/100 Mbps)MII (10/100 Mbps)
External Memory
SRAM / NOR / NAND / SDRAM(tick) / (tick) / - / (tick) (8/16/32-bit)(tick) / (tick) / - / (tick) (8/16/32-bit)(tick) / (tick) / - / (tick) (8/16-bit)
SD/MMC / SDIOSPI Mode / -SPI Mode / -SPI Mode / -
SQI (XIP)(tick)(tick)(tick)
Security
Crypto Core--

SSL/TLS accelerator, up to RSA-4096, ECC-512, AES-256, and SHA-512

Secure Boot--Mask ROM Code, RSASSA-PSS/ECDSA
Built-in support--Security levels, AHB Firewall
Debug
Debug / TraceJTAG / ETMJTAG / -JTAG/SWD / 4-bit TPIU
Boundary ScanJTAGJTAGJTAG 
Analog
DC/DC / POR / BOD--(tick) / (tick) / (tick)
Thermal diode--(tick)
Clock Supervisor--Xtal (RC-Osc)
Electrical
Power supply3.3 V, 1.5 V3.3 V, 1.5 VSingle 3.3 V

Temperature range

Ta -40°C ... +85°CTa -40°C ... +85°C

Ta -40°C ... +85°C/+105°C*1(Tj_max ≤ +125°C)

Power consumption1.5 W (typ.)1.5 W (typ.)≤ 1 W

Package dimension

324-Pin BGA, 19x19 mm2, 1 mm Ball Pitch244-Pin BGA, 15x15 mm2, 0.8 mm Ball Pitch

144-pin BGA, 10x10 mm2, 0.8 mm Ball Pitch

Note 1:

  • Depends on the thermal characteristics of the embedded design and the targeted mission profile (see netX 90 Design-In Guide)

Note 2:

  • Channel-based real-time communication interface, which supports all popular Industrial Ethernet and Fieldbus standards
  • List of software protocol stacks by netX Technologies for industrial slave or device applications
  • No labels