Skip to end of banner
Go to start of banner

EtherNet/IP Adapter V5.4.0.3

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Release notes summary


Firmware Generation Status

ACTIVELATEST

Remarkrecommended for new projects
AvailabilitynetX 90 (tick)

Type

HOTFIX

Maintenance Status

MAINTAINED

Date

2024-01-30

Summary

New Features:

  • PSEISV5-400: Add new API service EIP_OBJECT_TERMINATE_CONNECTION_REQ

Bugs:

  • PSEISV5-417: Link loss may cause TCP to be half open for a long time
  • PSEISV5-411: Performance issue: I/O send failure due to packet loss in single port variants when IP-stack is flooded with, e.g., ARPs
  • PSEISV5-399: Increase the number of supported class 0/1 connections from 5 to 8
Additional information


Maintenance Firmware

  • netX90 Usecase C requires Maintenance Firmware V1.3.0.0 or newer

  • netX90 Usecase A is compatible to Maintenance Firmware V1.1.0.x or newer

Note

Starting with firmware version V5.4.0.0, the firmware requires netX 90 with date code 1910 and later.
If a NXHX 90-JTAG is used, hardware revision 4 or higher is required. netX 90 samples (date code before 1910)
are no longer supported which is the case for NXHX 90-JTAG hardware revision 3 or lower.

Certification relevant issues

Getting issues...

Certification infoIntended for Composite Test Version: CT19.1, CT20
Changes in this version

type key summary resolution
Refresh


Downloads

Documentation: 

Firmware:


  • No labels