Features

Owned by Heinz Hentsch
Last updated: 2013-10-14 by Former user (Deleted)Version comment

Key Features

  • PROFIBUS DP-V0
  • PROFIBUS DP-V1 class 1 and 2
  • Automatic baud rate detection

Supported State Machines

  • FSPMS (Fieldbus Service Protocol Slave state machine)
  • MSCY1S (Master to Slave cyclic state machine)
  • DMPMS (Data Link Mapping Protocol Slave state machine)
  • MSAC1S (Master Class1 to Slave acycliec state machein)
  • MSAC2S (Master Class2 to Slave acyclic state machine)
  • MSRM2S (Master Class2 to Slave resource Manager state machine)
On this page

 

Technical Data

FeatureDescription
Maximum number of cyclic input data244 bytes
Maximum number of cyclic output data244 bytes
Maximum number of acyclic read/write240 bytes
Configuration dataMax. 244 bytes
Parameter data237 bytes application specific parameters
Acyclic communication

DP V1 Class 1 Read/Write

DP V1 Class 1 Alarm

DP V1 Class 2 Read/Write/Data Transport

Baud rate

Fixed values ranging from 9,6 kBits/s to 12 MBit/s

Auto-detection mode is supported
Data transport layerPROFIBUS FDL

Configuration

Configuration by packets to transfer config parameters or by using SYCON.net configuration database.

Diagnostic

Firmware supports common and extended diagnostic in the dual-port-memory for loadable firmware.