Internal SW/FW approval V2.0.0.0
- Mirko Kroll
Attendees
Date
Scope
New set of NT100 Firmware with following key updates and features
- all stack updates according NT100 Stack History
- rcX update from V2.0 to 2.1
- discontinue XXX-OMB; XXX-EIS; XXX-EIM combinatiosn (these combinations are available in NT151)
SW/FW released version
No. | Product (Variants) / Component Name | Version/Rev. |
1 | Loadable firmware for for netTAP 100 List of variants | V2.0.0.0 |
| 2 | SyCon.net | V1.0500.200828.33536 |
Device Under Test (DUT)
No. | Product (Variants) / Component Name | Version |
| 1 | netTAP 100 (several HW variants) | see system test report |
Release recommendation
Internal approval |  |
Checklist
No. | SWQ action | Check of the results | Provide reasons, if results are not satisfied or provide a link/ticket as a proof |
1 | Formal review of SW requirements list | No formal review needed | |
2 | Formal review of specification (SOW) | ||
3 | Formal review of design parts | ||
4 | Perform code reviews |
|
|
5 | Perform static code analysis |
|
Gateway sorces improved aginst PC Lint checks: |
6 | Create a test plan |
| Quality assurance (QA): Development (DEV):
Conformance Tests (NXS): |
7 | Create test case specifications |
| Quality assurance (QA): Development (DEV): |
8 | Perform tests |
| Quality assurance (QA): Development (DEV):
Conformance Tests:
|
9 | Create a version space |
| |
10 | Perform the internal release approval |
| Note:
|
| 11 |
|
| |