netRAPID 90 DVD 2020-03-1 - BETA

Release Notes
Status

BETA      

Date10. März 2020
Version1.0.1.0
Summary
  • Second BETA Version with updated netX Studio CDT

Note: We reserve the right to make technical changes without prior notice.

netRAPID 90 - Business Model

Companion Solution - Preloaded communication module

You can use netRAPID 90 as companion solution in the style of a communication module to be connected with a host CPU.

In this scenario, netRAPID 90 comes preloaded with a communication protocol and is ready to use.

For the companion solution, no netX licence or support contracts are required.

In the preloaded version, the pin assignment is fixed to certain functionality:

  • Real-Time Ethernet or Fieldbus Slave
  • SPI interface to the host CPU
  • LEDs (COM0, COM1, Link/Activity 0/1)
  • SYNC0/1
  • UART Diagnosis
  • +3.3V, GND

Standalone Solution - Programming platform like a netX90 chip

You can use netRAPID 90 in a stand-alone solution without any host.

This use case can be considered as nearly identical to the direct use of a netX 90 chip.

The pin assignment is flexible and can be adapted by the customer according to his or her needs by using the tool netX Studio CDT.

For this approach, a netX license and support agreement as well as the purchase of appropriate protocol stacks are required.

In this scenario, the netRAPID 90 is provided as a pure hardware-platform.


Option:

To reduce production costs at the OEM, Hilscher optionally offers the service to supply netRAPID 90 preloaded with customer specific content.

For further details about this service please contact the Hilscher sales team.


Getting Started

Software Installation for Companion Solution:

  1. Install the USB_FTDI-SPM driver (NXDIAG) to gain access to the NRPEB H90-RE Evaluationboard via the USB-SPM host interface
    → netX Diagnostic and Remote Access\2019-08-1\netX serial DPM via USB\netX USB FTDI driver installation\Windows\setup.exe
  2. Install the Device Explorer to load or update the Communication firmware on the NRPEB H90-RE
    Device Explorer V1.2.9.28661 Setup.exe
  3. Install the Device Library
    Device Library V1.0.41.28658 Setup.exe
  4. Install the Communication Studio to set up a configruation
    CommunicationStudio V1.0.25.28588 Setup.exe

Software Installation for Standalone Solution:

  1. Install the USB_FTDI-SPM driver (NXDIAG) to gain access to the NRPEB H90-RE Evaluationboard via the USB-JTAG interface
    → netX Diagnostic and Remote Access\2019-08-1\netX serial DPM via USB\netX USB FTDI driver installation\Windows\setup.exe
  2. Install the netXStudio CDT to create a HWC, FDL or own application and to download to the NRPEB H90-RE
    → netX Studio CDT V1.0610.1.2808 x86 Setup - netRAPID90 only - BETA.msi

Note: For netRAPDI90 please use the following SQJ Flash type: Winbond W25Q32BV or W25Q32FV


Auxiliary Tools:

  1. netHOST
    • Easy to use tool which can access any Hilscher product either via the host interface (DPM, SPM) or the diagnostic interface (UART, USB)
      Is used for Firmware download, diagnostics and to test I/O exchange
    • Can be found at the netX Diagnostic and Remote Access DVD
      → netX Diagnostic and Remote Access\2019-08-1\Windows Executable\netHost

  2. Start your netRAPID 90 development with a netX 90 development board

Firmware:

  • For full support with the Hilscher tool chain the minimum firmware version has to be used:
    • PNS V5.1.0.2 or higher
    • EIS V5.1.0.2 or higher
    • ECS V5.1.0.2 or higher
  • In case a firmware version lower than mentioned above is loaded, use the auxiliary tool: netHOST

Hardware:

  • The netRAPID90 Evaluationbaord NRPEB H90-RE is always equipped with a NRP H90-RE\F8D8.
  • Therfore COM firmware in UseCase A or C can be used. More info can found in the Technology Section

  • netRAPID90 covers two different approaches:
    • Companion Solution - preloaded with fixed function set.
      In this approach the OEM doesnt want to deal with any FDL or HWC creation and doesnt need netXStudio CDT.
    • Standalone Solution - naked hardware as programming platform
      In this aproach the OEM needs netXStudio CDT and will create all necessary firmware by himself.
  • To serve both approaches the netRAPID 90 Evaluation Board comes in the easy-to-use Companion Mode, preloaded with:
    • HWC - Hardware Config file
    • FDL - Flash Device Label
    • MFW . Maintenance Firmware
    • EIS limited Firmware (UseCase C)
  • For Standalone solutions, the OEM has to create his own files and just overwrite the existing files.

Differences NRPEB H90-RE and NXHX 90-JTAG

  • As the netRAPID 90 serves two use cases (Companion solution with SPM host interface and Standalone solution) there are minor differences between netX90 and netRAPID 90 evaluation boards.
    • NXHX 90-JTAG provides JTAG via USB and UART via USB interface
    • NRPEB H90-RE provides JTAG via USB and SPM via USB interface
  • For UART via USB access on NRPEB H90-RE please use an external adapter, for example "USB to Serial converter" from DIGITUS (DA-70156)



Components - Tools
Components - Firmware
Configuration Tool

Communication Studio - Tool to create a network configuration and to download to the device.

Operating SystemWindows 8Windows 8.1Windows 10
Status(tick)

(Haken)

(Haken)

Configuration Tool

Device Library - Library with all Hilscher devices for the Communication Studio

Operating SystemWindows 7Windows 8Windows 8.1Windows 10
Status(tick)(tick)

(Haken)

(Haken)
Configuration Tool

Device Explorer - Tool to load a communication firmware to a hardware target.

Operating SystemWindows 7Windows 8Windows 8.1Windows 10
Status(tick)(tick)

(Haken)

(Haken)
netX Development with Eclipse

netX Studio Engineering CDT (netX Development with Eclipse) - Tool to create a Flash Device Label (FDL), Hardware Config File (HWC) and application for netX90 based devices.

Operating System Windows 2000Windows XP SP3Windows Vista SP2Windows 7Windows 8Windows 8.1Windows 10
Status(Fehler)(error)(error)

(Haken)

(Haken)

(Haken)

(Haken)
Supported Hardware and Protocols

CC-Link

Slave

CANopen

Slave

DeviceNet

Slave

PROFIBUS-DP

Slave

CC-Link IE Field Basic

Slave

EtherCAT

Slave

EtherNet/IP

Adapter

Modbus/TCP

Client/Server

POWERLINK

Controlled Node

PROFINET IO

Device

Sercos

Slave

VARAN

Client

optional

OPC UA / MQTT

optional

Security

optional

WebServer pages

NRP H90-RETBDTBDTBD(Haken)TBD(tick)(tick)TBDTBD(tick)TBDTBD(error)(error)(error)
NRP H90-RE\F8D8TBDTBDTBD(tick)TBD(tick)(tick)TBDTBD(tick)TBDTBDTBDTBD(tick)
Product Features
netRAPID types

Protocol support

(for more details, please see the Technology section)

Host interfaceDiagnostic interface

SYNC0/1


Memory OptionsIntegrated
magnetics

Real-Time Ethernet Slave

Fieldbus SlaveOPC UA Server
& MQTT Client
Raw Ethernet (NDIS)TCP socket interfaceIntegrated WebServerSPM

DPM

USBUARTSQI FLASHSDRAM
NRP H90-RE(tick)(tick)(error)(tick)(tick)

BASIC

(Haken)(error)(error)(tick)(tick)(error)(error)(error)
NRP H90-RE\F8D8(tick)(tick)(tick)(tick)(tick)(tick)(Haken)(error)(error)(tick)(tick)8 MByte8 MByte(error)


Note:

Depending on the available memory size (Internal RAM / Flash and external SDRAM / SQI Flash) different firmware functionality can be used.

  • Firmware for small footprint, low cost and function optimized slave devices
    Use Case A firmware for internal RAM / Flash only
  • Full featured firmware for highest function requirements
    Use Case C firmware which needs external SDRAM / SQI Flash

Details about the avaialble functionality can be found in the Technology section.


Host interface channel structure of NRP 51-RE


Channel 0: Real-Time Ethernet or Fieldbus Slave (Cyclic & Acyclic I/O)

Channel 1: NDIS, TCP socket and Web Interace

Channel 2: IOT communication as future option


Note1: At netRAPID90 All 3 channel can be can only be accessed in SPM host interface mode.

Note2:  netRAPID 90 owns 4 MAC addresses (MAC0 to MAC3), which will be provided per default from the Hilscher MAC address pool.

            MAC0 will be used for RTE communication in channel 0. MAC1 and MAC2 are reserved for Real-Time Ethernet. MAC3 will be used for Raw Ethernet.

            TCP socket in channel 1 and future IoT communication in channel 2 will use the same MAC0 and IP as the RTE communication.

            Raw Ethernet in channel 1 will use MAC3. IP address will be provided from the host application.


Changes in this version

General

  • First BETA Version for evaluation purpose
  • For Compantion Solution only

Specific functionality

  • For Companion Solution:
    • Communication Studio & Device Library for network Configruation
    • Device Explorer for Firmware download and device assignement
    • EtherNET Adpater firmware
    • USB - SPM host interface driver
    • UART diagnostic
  • For Standalone solution
    • netXStudio CDT
    • USB - JTAG driver
Documentation

netRAPID 90 Design Guide - DRAFT


netX Studio CDT - netRAPID 90 development


netX Studio CDT - netX 90 development

Getting Started - netRAPID 90


Communication Studio OI DE - Vorläufig


Device Explorer OI DE - Vorläufig


 Return to overview page...