netX 90 - EtherCAT Slave - simpleConfigFOC V3.1.0.0

Owned by Stefan Neumann
Last updated: 2022-09-12
1 min read
Release Notes
Status

RELEASE

DateEST: 2022-09-12
SummaryExample combining the simple config one with a motion FOC
ToolchainnetXSTUDIO CDT V1.1000.1.5682
Description

Shall be used with the NEW NXHX 90-MC Development Board

  • a simple EtherCAT configuration example, using SET_CONFIGURATION_REQ packet
  • Containing also an FOC Example of the motion peripherals.
  • please refer to the file "README.txt" for further information
  • please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!
Documentation
Changelog
  • update FOC
Restrictions
  • limited tests
  • contains a limited evaluation firmware
Resources

  File Modified

ZIP Archive netXStudio_ECSV5_simpleConfigFOC V3.1.0.0.zip

2022-09-12 by Stefan Neumann


Return to overview page...