netX 90 - EtherNet/IP Adapter - simpleConfigFOC V3.0.0.0

Owned by André Groß
Last updated: 2021-11-26 by Stefan Neumann
1 min read
Release Notes
Status

RELEASE     

DateEST: 2020-03-10
SummaryExample combining the simple config one with a motion FOC
Toolchain

netXSTUDIO CDT V1.0900.1.XXXX

Description

Shall be used with the NEW NXHX 90-MC Development Board

  • a simple EtherNet/IP configuration example, using SET_CONFIGURATION_REQ packet
  • Containing also an FOC Example of the motion peripherals.
  • please refer to the file "README.txt" for further information
  • please refer to the Agreement in "README_DISCLAIMER.txt", provided together with this packet!
Changelog


Documentation
Restrictions
  • limited tests
Resources

  File Modified

ZIP Archive netXStudio_EISV5_simpleConfigFOC V3.0.0.0.zip

2021-03-10 by Stefan Neumann


Return to overview page...