FAQ - V3.5 to V3.x
- Heinz Hentsch
- Anonymous
- Benjamin Meyer
- Tobias Klebert
Owned by Heinz Hentsch
Recently modified FAQs
- How to decode cyclic PROFINET frames?
- Profinet IO Device incompatibility to Siemens CPU1500 with firmware V2.9
- What is the roadmap of PROFINET certification testbundle 2018? How about corresponding Hilscher protocol stacks? (Update 2018-07-25)
- How to deal with I&M data? (Updated 2016-12-20)
- Is IP communication possible before the PROFINET stack is configured? (NXLOM only)
- What are the difference between the net load classes?
- What are the know issues of Profinet V2.33 Certification Bundle of April, 2016?
- Where can I get general information what to keep in mind when building a PROFINET device?
- Which UDP and TCP ports are used by the PROFInet Device protocol stack?
- How to solve errors in testcase DIFF_ACCESS_WAYS reported by PROFINET IO Tester V2.3.5.25.4434?
Â
Â
Labels in this space
-
C
- certification
- communication_quality
- comsol_2017-03-1-fw
- comsol_2017-03-1-obsolete
- comsol_2017-08-1_fw
- comsol_2017-08-1_obsolete
- comsol_2018-12-1-fw
- comsol_2020-12-1-fw
- comsol_2021-03-1-fw
- comsol_2021-06-1-fw
- comsol_2021-07-1-fw
- comsol_2021-11-1-fw
- comsol_2022-03-1-fw
- comsol_2023-07-1-fw
- comsol_2024-06-1-fw
- comsol_2024-07-1-fw
- comsol_90_2021-09-1-fw
- comsol_90_2022-03-1-fw
- comsol_90_2024-01-1-fw
- comsol_90_4x00_2019-09-1-fw
- comsol_90_4x00_2020-06-1-fw
- comsol_90_4x00_2021-03-1-fw
- current-version
-
D-M
-
N
-
O
-
P
- pns
- profinet-tech
- protocols-application-development-guide
- protocol-tech
- ps_pns_3_4_current_release
- ps_pns_3_4_versioninfo
- ps_pns_3_5_current_release
- ps_pns_3_5_obsolete
- ps_pns_3_5_versioninfo
- ps_pns_3_6_current_release
- ps_pns_3_6_obsolete
- ps_pns_3_6_versioninfo
- ps_pns_5_current_release
- ps_pns_5_obsolete
- ps_pns_5_versioninfo
-
Q-Z
Â
Â
All FAQs
- How many MAC addresses are required for a PROFINET device
- How to deal with I&M data? (Updated 2016-12-20)
- How to decode cyclic PROFINET frames?
- How to solve errors in testcase DIFF_ACCESS_WAYS reported by PROFINET IO Tester V2.3.5.25.4434?
- Is IP communication possible before the PROFINET stack is configured? (NXLOM only)
- My IO Device shall pass through IRT but shall not be an IRT device. How can i achieve this?
- My PROFINET device cannot establish a connection to the Controller
- Profinet IO Device incompatibility to Siemens CPU1500 with firmware V2.9
- What are the difference between the net load classes?
- What are the know issues of Profinet V2.33 Certification Bundle of April, 2016?
- What are the requirements for a PROFINET pre-certification test at Hilscher?
- What happened with Profinet IO-Device v3.5.x?
- What is the roadmap of PROFINET certification testbundle 2018? How about corresponding Hilscher protocol stacks? (Update 2018-07-25)
- What needs to be taken in account when updating from V3.4 to V3.5?
- What to do to build an IO Device according to Conformance Class B (certify without IRT)?
- Where can I get general information what to keep in mind when building a PROFINET device?
- Which PROFINET switch / XCs is used in which Version / netX?
- Which UDP and TCP ports are used by the PROFInet Device protocol stack?
- Why do rcX functions Drv_SysTimeXXX() return unexpected values when using Profinet IO Device stack and how can i deal with that?