Network Interface | Console Interface | UART | |
Real-time Ethernet | DUAL PHY | ||
PHY0 | Disabled | ||
Fieldbus | XM0 | Disabled | |
Host Interface | SPM | SPM0 | |
Application Peripherals | SQI | SQI0_B_SPI | |
SQI0_B_SQI | |||
SQI1 | |||
MMIO | MMIO0 | ||
MMIO1 | |||
MMIO2 | |||
MMIO3 | |||
MMIO4 | |||
MMIO5 | |||
MMIO6 | |||
MMIO7 | |||
MMIO8 | |||
MMIO9 | |||
MMIO10 | |||
MMIO11 | |||
MMIO12 | |||
MMIO13 | |||
MMIO14 | |||
MMIO15 | |||
MMIO16 | |||
MMIO17 | |||
IO Link | IO_Link0 | ||
IO_Link1 | |||
MLED | MLED4 | ||
MLED5 | |||
MLED6 | |||
MLED7 | |||
MLED8 | |||
MLED9 | |||
MLED10 | |||
MLED11 | |||
PIO | PIO_APP0 | ||
PIO_APP10 | |||
PIO_APP12 | |||
PIO_APP17 | |||
PIO_APP18 | |||
PIO_APP20 | |||
PIO_APP21 | |||
PIO_APP22 | |||
PIO_APP23 | |||
PIO_APP27 | |||
BiSS | BiSS0 | ||
BiSS1 | |||
EnDat | EnDat0 | ||
EnDat1 | |||
ADC | ADC0_IN0 | ||
ADC0_IN1 | |||
ADC1_IN0 | |||
ADC1_IN1 | |||
ADC2_IN0 | |||
ADC2_IN1 | |||
ADC2_IN7 | |||
ADC3_IN0 | |||
ADC3_IN1 | |||
ADC3_IN2 | |||
ADC3_IN3 |
Shared signals
As you might have noticed, some signals are shared, so that they cannot be selected at the same time. The following table shows the dependencies between the signals:
RED netX 90 Pins, that cannot be selected by NRP H90
YELLOW netX 90 Pins, that can be selected by NRP H90
GREEN netX 90 Pins, that are recommended by NRP H90 Design-in guide
GREY netX 90 Pins, that are not selectable and therefore also NRP H90 pins
Error rendering macro 'viewxls' : Failed to find attachment with Name Comparision_netX90_NRP H90_Pinout.xlsx