Versions Compared

Old Version 12

changes.mady.by.user André Groß

Saved on

compared with

New Version 13

changes.mady.by.user Tobias Klebert

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: formatting
Panel
bgColor#ffffff
titleQ

How is the target reset of the JTAG connected correctly?

Panel
bgColor#ffffff
titleConnector ARM20 and FTDI

ARM20 features two reset signals: The test reset and the system reset. Both have to be connected to netx 90.

netX 90 pinJTAG adapter
ARM20
JT_TRSTTRST-
RST_IN_NSRST-
Panel
bgColor#ffffff
titleMIPI20

The MIPI20 adapter has only one RESET- signal available.

The RESET- pin of the MIPI 20 connector is connected to the system reset (analog to JTAG ARM20 SRST-) to the netx 90 RST_IN_N pin.

Because the netX 90 JT_TRST signal resets only the JTAG debug domain, this pin remainbs unconnected in case of JTAG MIPI 20 connector.

netX 90 pinJTAG adapter
MIPI 20
RST_IN_NRESET-


Panel
bgColor#ffffff
titleSee also...

Filter by label (Content by label)
showLabelsfalse
spaces@self
showSpacefalse
cqllabel = "faq" and space = currentSpace()
labelsfaq

Panel
bgColor#ffffff
titleConnectors

The following table illustrates the pinning of the debug connectors.


ARM 20

MIPI 20 Narrow

Coresight 20 JTAG

Coresight 20 SWD
Example Image

Image Modified

Image Modified

Image Modified

Image Modified

CommentNXHX 90 - JTAG (Rev 1/Rev 2)NOT USEDNXHX 90 - JTAG (Rev 3/Rev 4) with tracing disabledNXHX 90 - JTAG (Rev 3/Rev 4) with tracing enabled

Pinning

Pinning:

SignalPinPinSignal
VTREF12VSUPPLY
TRST-34GND
TDI56GND
TMS78GND
TCK910GND
RTCK1112GND
TDO1314GND
SRST-1516GND
DBGRQ1718GND
DBGACK1920GND

Pinning:

SignalPinPinSignal
VREF_DEBUG12TMSC
GND34TCKC
GND56EXT
GND78BCE
GND910RESET-
GND1112TRC_CLK
GND1314TRC_DATA0
GND1516TRC_DATA1
GND1718TRC_DATA2
GND1920TRC_DATA3

Pinning:

SignalPinPinSignal
VREF_DEBUG12TMS
GND34TCK
GND56TDO
GND78TDI
GND910RESET-
GND1112TRC_CLK
GND1314TRC_DATA0
GND1516TRC_DATA1
GND1718TRC_DATA2
GND1920TRC_DATA3

Pinning:

SignalPinPinSignal
VREF_DEBUG12SWDIO
GND34SWCLK
GND56SWO
GND78N/C
GND910RESET-
GND1112TRC_CLK
GND1314TRC_D0
GND1516TRC_D1
GND1718TRC_D2
GND1920TRC_D3

Converter for ARM 20 to Coresight 20 JTAG:

See http://www2.lauterbach.com/pdf/app_arm_jtag.pdf

LA-3770 Converter ARM-20 to MIPI-10/20/34

JUMPER/Solder Bridges might have to be changed to: CORESIGHT-20-JTAG

Panel
bgColor#ffffff
titleSee also...
Filter by label (Content by label)showLabelsfalsespaces@selfshowSpacefalsecqllabel = "faq" and space = currentSpace()labelsfaq