There are two USB drivers available for netX 90. - USB driver for Flasher CLI, which can be used with muhkuh framework, flasher and netX Studio
- netX USB FTDI driver, which can be used for netX hardware with FTDI 2232 USB to SPI controller
The following table shows an overview of different driver usages for different devices and applicaiton: | Product | USB ID/Device Name | Port | Applicaiton | USB-Driver and Versions | Driver | Hilscher KB pages | Comments |
|---|
NXHX 90-JTAG | (Universal Serial Bus Device)
NXHX 90-JTAG USB-JTAG (USB-Controller)
NXHX 90-JTAG B (Anschlüsse (COM&LPT))
NXHX 90-JTAG USB Serial Port(COMxx) | mini USB (X1000) MI_00= JTAG MI_01=UART | netX Studio CDT / Flasher / netHost (Serial Port) | NXHX90-JTAG USB-JTAG driver (10/16/2018 2.4.7) | bootloader_windows_driver-2.4.7.zip | V2.4.7 Windows USB driver for flasher CLI |
ONLY for communication with netX Rom code / bootloader; NOT for communication with 2nd stage loader or firmware ( (Flasher) support for JTAG / UART interface |
(Marshaller) via FTDI chip | | NRPEB H90-RE | Win 7: Hilscher NRPEB-SPM(IF0)
Hilscher NRPEB-SPM(IF1) Win 10: NRPEB H90-RE
NRPEB H90-RE | USB JTAG SPM (X700) | netHost (SPM) / Device Explorer / Communiction Studio (netX serial DPM via USB/SPI) | netX USB FTDI driver V3.0.0.0 | netX USB FTDI driver installation V3.0.0.0.zip | V3.0.0.0 (NXUSBFTDI) | USB driver installation for netX hardware with FTDI 2232 USB to SPI controller. Note:
This installaion only supports hardware with JTAG and SPM combinations connected to the FTDI chip.
Other combinations like JTAG and COM ports are currently not supported and installed via different installation programs. | | ARM-USB-TINY-H (Olimex) | Olimex OpenOCD JTAG ARM-USB-TINY-H (Interface 0) Olimex OpenOCD JTAG ARM-USB-TINY-H (Interface 1) | USB-JTAG | netX Studio CDT | WinUSB 6.1.7600.16385 |
|
| It is recommended to use a piece of software which simplifies the drivers installation (or the change of drivers), which called Zadig. The Zadig program might be downloaded from here: http://zadig.akeo.ie/ | | NXJTAG-USB | NXJTAG-USB (Interface 0) NXJTAG-USB (Interface 1) | usb-JTAG | netX Studio CDT / Flasher | NXJTAG-USB USB-JTAG driver USB driver for the netX ROM code | bootloader_windows_driver-2.4.7.zip | V2.4.7 Windows USB driver for flasher CLI | Driver for NXJTAG-USB LibUSB based JTAG interface | | NXHX-FTDI | Hilscher NXHX-FTDI (IF0) Hilscher NXHX-FTDI (IF1) | miniUSB on NXHX-FTDI | netHost (SPM) / Device Explorer / Communiction Studio (netX serial DPM via USB/SPI) | netX USB FTDI driver V3.0.0.0 | netX USB FTDI driver installation V3.0.0.0.zip | V3.0.0.0 (NXUSBFTDI) | USB driver installation for netX hardware with FTDI 2232 USB to SPI controller |
|