Attach a controller to the engineering PCs network card. Attention, you need a cross over wire or a switch/hub between controller and engineering PC. Be shure sure the IP of the engineering PC is located at the same subnet as the controller.
At Indraworks create a new Projekt. Leve Leave the Project settings as suggested by engineering. Add a controller (e.g. MLC L65) to your project.
...
In the next Step expand in the "Project Explorer" window the currentley currently added master.
Open the "Tool" menu and select "Device Database..."
At the appering appearing window click on the button "Add Devices...". Now add the cifX SDDML file delivered with the firmware.
...
Open at the "Library" view the "Periphery" tab and open "sercos III". Drag and drop the currentley currently added cifX device to the sercos network on the left side.
...
Right click on the controller and select "switch online" acknowlede acknowledge all appering appearing dialog boxes with okay.
A appering "Adjustment of sercos Device Configuration" has to be done. Just change the addres address in Project within this menu.
...