The netX chip carrier netRAPID runs through a periodical system test. Usually this will be done with the release of a new product DVD, which contains firmware, device driver, configuration tool, auxiliary tools and documentation. The comprehensive tests will ensure an optimal interaction between all components and results in a fixed assignment between latest hardware, firmware, device driver, bootloader and configuration tool.
If you are using a different combination and you are facing problems, please contact your local distributor or Hilscher support.
 | Current release: | For previous versions see version history. |
Communication Studio - Tool to create a network configuration and to download to the device. Device Library - Library with all Hilscher devices for the Communication Studio Device Explorer - Tool to load a communication firmware to a hardware target. netX Studio Engineering CDT (netX Development with Eclipse) - Tool to create a Flash Device Label (FDL), Hardware Config File (HWC) and application for netX90 based devices. CC-Link Slave CANopen Slave DeviceNet Slave PROFIBUS-DP Slave CC-Link IE Field Basic Slave EtherCAT Slave EtherNet/IP Adapter Modbus/TCP Client/Server POWERLINK Controlled Node PROFINET IO Device Sercos Slave VARAN Client optional OPC UA / MQTT optional Security optional WebServer pages Protocol support (for more details, please see the Technology section) SYNC0/1 Real-Time Ethernet Slave DPM BASIC Note: Depending on the available memory size (Internal RAM / Flash and external SDRAM / SQI Flash) different firmware functionality can be used. Details about the avaialble functionality can be found in the Technology section. Channel 0: Real-Time Ethernet or Fieldbus Slave (Cyclic & Acyclic I/O) Channel 1: NDIS, TCP socket and Web Interace Channel 2: IOT communication as future option Note1: At netRAPID90 All 3 channel can be can only be accessed in SPM host interface mode. Note2: netRAPID 90 owns 4 MAC addresses (MAC0 to MAC3), which will be provided per default from the Hilscher MAC address pool. MAC0 will be used for RTE communication in channel 0. MAC1 and MAC2 are reserved for Real-Time Ethernet. MAC3 will be used for Raw Ethernet. TCP socket in channel 1 and future IoT communication in channel 2 will use the same MAC0 and IP as the RTE communication. Raw Ethernet in channel 1 will use MAC3. IP address will be provided from the host application.Operating System Windows 8 Windows 8.1 Windows 10 Status 
Operating System Windows 7 Windows 8 Windows 8.1 Windows 10 Status Operating System Windows 7 Windows 8 Windows 8.1 Windows 10 Status Operating System Windows 2000 Windows XP SP3 Windows Vista SP2 Windows 7 Windows 8 Windows 8.1 Windows 10 Status 
NRP H90-RE TBD TBD TBD TBD TBD TBD TBD TBD NRP H90-RE\F8D8 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD netRAPID types Host interface Diagnostic interface Memory Options Integrated
magneticsFieldbus Slave OPC UA Server
& MQTT ClientRaw Ethernet (NDIS) TCP socket interface Integrated WebServer SPM USB UART SQI FLASH SDRAM NRP H90-RE NRP H90-RE\F8D8 8 MByte 8 MByte
Use Case A firmware for internal RAM / Flash only
Use Case C firmware which needs external SDRAM / SQI Flash
Documentation about the products and tools can be found at:
- The Documentation Library
- The current product DVD
More information on www.hilscher.com
Blog stream
Create a blog post to share news and announcements with your team and company.
 | More FAQs ... |