Key Features
- Cyclic I/O data (Implicit Messaging): class 0 / class 1
- Acyclic data (Explicit Messaging): Unconnected / Connected (class 3)
- Connection Application Types: Exclusive Owner, Input Only, Listen Only
- Trigger Types: Cyclic, Change of State, Application Triggered
- Device Level Ring (DLR) - Media Redundancy
- Address Conflict Detection (ACD)
- Quality of Service (QoS)
- CIP Sync
- QuickConnect (Fast Startup)
- NULL-ForwardOpen
- CIP Safety "Ready" (provides all necessary features and interfaces to attach a CIP Safety stack on top)
- Firmware built-in CIP Object model can be extended by additional CIP objects (e.g. to support CIP profiles)
Supported Protocols
- TCP/IP, UDP/IP
- DLR
- DHCP / BOOTP
- IEEE 802.3
- IEEE 802.1Q
- LLDP
- SNMP
Technical Data
The technical data of the individual available firmwares differ slightly. Therefore, the below table only provides a rough overview of the supported features.
For a detailed listing of the technical data, please refer to the data sheet of the firmware.
Note: Firmware data sheets are available for version V3.8.0.0 and higher. You can find them in the "Resources" section.
| Feature | Description |
|---|---|
| Maximum number of input data per assembly instance | 504 bytes |
| Maximum number of output data per assembly instance | 504 bytes |
| Maximum number of assemblies | 10 |
| IO Connection Types (implicit) | Exclusive Owner, Listen Only, Input only |
| IO Connection Trigger Types | Cyclic, minimum 1 ms* |
| Explicit Messages | Connected (class 3) and unconnected |
| Unconnected Message Manager (UCMM) | supported |
| Max. number of connections | Class 1: 5 Class 3: 10 UCMM: 10 |
| Max. number of user specific objects | 20 |
| Predefined standard objects | Identity Object (0x01) |
| DHCP | supported |
| BOOTP | supported |
| Baud rates | 10 and 100 MBit/s |
| Duplex modes | Half Duplex, Full Duplex, Auto-Negotiation |
| MDI modes | MDI, MDI-X, Auto-MDIX |
| Data transport layer | Ethernet II, IEEE 802.3 |
| Address Conflict Detection (ACD) | supported |
| DLR (ring topology) | supported |
| Integrated switch | supported |
| CIP Reset services | Identity Object Reset Service of Type 0 and 1 |