Q
I want to update the firmware of my netANALYZER NANL-B500G-RE device. How can I do this?
A
- Open the Ethernet Device Configuration utiliy
- Scan for devices
- Obtain the IP address of the netANALYZER you want to update
- Open the Windows explorer (alternatively a common FTP utility may be used)
- Enter ftp://192.168.1.1, where the IP address shall be given with the address obtained from step 3
- On the login screen enter "update" as user name and "nanl-b500g-re" as password (without the double quotes)
- Copy the incremental firmware update file to the netANALYZER's FTP target by drag'n'drop the file nanl-b500g-re.update
The .update file can be found on the netANALYZER DVD in the folder NANL-B500G-RE firmware update
- Once the file is copied the FTP folder should contain the file nanl-b500g-re.update, there may exist a file update.log from a previous update process, the log file contains information about the update process and can be ignored by the end user
- Power off your NANL-B500G-RE device
- Power on your NANL-B500G-RE device and wait until the device is fully operational (SYS LED = green, STA0 LED = red, STA1 LED = off)
- The device is now updated
- To verify if the update process was successfully you may verify the version information, open the netANALYZER application and select your device
- Open the Info dialog box
- The firmware versions of your NANL-B500G-RE device should now be on the new state
Note, that the version shown in this picture may differ from you latest version you just installed
See also...