Skip to end of banner
Go to start of banner

MFW(Maintenance Firmware) V1.2 or higher version failed to update NAI file, what could be the problem?

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Q

Why I can't update application firmware (NAI file) using MFW V1.2, V1.3 or V1.4 anymore? With MFW V1.1, it works without any problem.


A

MFW V1.2.0.0 and higher version will check NAI file header as well as NXI file. So you should add NAI file header information in your application firmware.

See the example with file header update:

https://kb.hilscher.com/display/NXLFWHST/netX+90+-+PROFINET+IO+Device+-+simpleConfig+V2.2.0.1


Please refer to the related netX90 FAQ pages below for more information.

https://kb.hilscher.com/display/NETX/Firmware+update

https://kb.hilscher.com/display/NETX/Firmware+validation+for+LFW%28Protocol+stacks%29+and+APP-FW+--Troubleshooting+guide+when+MFW+fails+to+start+the+updated+firmware

See also...

  • No labels