/
How to use standard printf() - rcX V2.1
How to use standard printf() - rcX V2.1
- Robert Mayer (Deactivated)
Owned by Robert Mayer (Deactivated)
This example shows how standard printf() can be included into rcX and used for teminal printouts.
The printf() consists of two files:
- rX_UartStdIOHook.c
The UART function implementation (initialization and libc integration) - rX_UartStdIOHook.h
Defines of the Hook functions
UART Hock InitializationFunction
/*****************************************************************************/
/*! rcX Function called to init the UART
* \param szUart Name of the UART instance
* \param szInterrupt Name of the UART's interrupt instance
* \return RX_OK on success */
/*****************************************************************************/
RX_RESULT UartStdIOHookInit(const char* szUart, const char* szInterrupt)
{
RX_RESULT erXRes = RX_OK;
if ( (RX_OK != (erXRes = rX_MemAllocateMemory(&s_hRecvSem, RX_SEMAPHORE_SIZE))) ||
(RX_OK != (erXRes = rX_SemCreateSemaphore(NULL, s_hRecvSem, 0))) )
{
rX_MemFreeMemory(s_hRecvSem);
} else
{
if( (RX_OK == (erXRes = Drv_UrtIdentifyUart(szUart, 0, &s_hUart))) &&
(RX_OK == (erXRes = Drv_UrtInitializeUart(s_hUart, UartRxReady, NULL, NULL, NULL, TRUE, &s_unUartHandler))) &&
(RX_OK == (erXRes = Drv_UrtEnableUart(s_hUart))) &&
(RX_OK == (erXRes = Drv_UrtEnableReceiver(s_hUart, TRUE))) )
{
if(RX_OK == (erXRes = Drv_IntIdentifyInterrupt(szInterrupt, 0, &s_ptIntUart)))
{
Drv_IntInitializeInterrupt(s_ptIntUart,
s_unUartHandler.fnIrq,
s_hUart);
Drv_IntEnableInterrupt(s_ptIntUart);
}
libc_file_init();
/* init the libc part */
Libc_RegisterStdOutFileHook(0, UartWrite, 0);
Libc_RegisterStdOutFileHook(1, UartWrite, 0);
Libc_RegisterStdInFileHook(UartRead, 0);
} else
{
rX_SemDeleteSemaphore(s_hRecvSem);
rX_MemFreeMemory(s_hRecvSem);
}
}
return erXRes;
}
The UART hook function must be called in the main task of the application (see below).
Example Task including UART initialization
/*****************************************************************************/
/*! Toolkit initialization function
* \param argc
* \param argv */
/*****************************************************************************/
void ToolkitSampleTask(void* pvParam)
{
TLR_HANDLE hReadyLed = NULL;
TLR_HANDLE hRunLed = NULL;
int32_t lTkRet = CIFX_NO_ERROR;
RX_HANDLE hSerDPM = NULL;
/* Signal task initialized */
rX_SysSetTaskInitialized(NULL);
/* Redirect printf output to uart */
UartStdIOHookInit("REALUART", "UART");
.......
}
The complete example can be downloaded here:
Downloads