Restrictions - V3
Restrictions
- Max. 2 connections: 1 for consumer and 1 for producer
- Modifications of the Service-Channel Object Dictionary are volatile after reset (if resides on device)
- Cross communication not supported yet
- UCC Communication: Second DPM Channel (“Ethernet Interface Task”) is not available on all hardware
- Clock parameters ulDTDivClk (Contents of DTDivClk register) and ulDivClkLength (DivClk Length) are no longer adjustable (since V3.1). ulDivClkLength is now always set to the fixed value 1 μs. In Div_Clk mode 0 it is not possible any more to configure aperiodic signals. ulConClkLength has now a maximum of 655350 ns.
Firmware Features
Feature | Integrated HTTP Server | Integrated | Integrated Diagnostic and Remote Access via | ||
Target | Serial | USB | TCP | ||
cifX | No | No | No | No | No |
comX | Yes | Yes, but no packet interface via Dual-port memory | No | Yes | No |
netJACK | |||||
netX 50 | Yes | Yes | No | No | No |
netX 100 | Yes | Yes | No | No | No |
netX 500 | Yes | Yes | No | No | No |
NXIO 50 | No | No | No | No | No |
NXIO 100 | No | No | No | No | No |
Features of the integrated HTTP Server
- Firmware Identification
- Firmware Update
- Device Reset
On this page