NXEB 90-SPE
| File | Modified | |
|---|---|---|
|
PDF File Disclaimer for use of free additional information from Hilscher.pdf Please read the disclaimer notice carefully before you start the download |
2024-11-04 by Jin Zhao | |
|
HTML File ibom_NXEB90_SPE-R4.html BOM - Revision 4.2 |
2024-10-31 by Jin Zhao | |
|
ZIP Archive NXEB90-SPE-R4.2-KiCad-Project.zip KiCad Project - Revision 4.2 |
2024-10-31 by Jin Zhao | |
|
PDF File NXEB90-SPE-R4.2-Schematic.pdf Schematic - Revision 4.2 |
2024-10-31 by Jin Zhao |
Overview of protocols supported by single port communication
Protocol | Single port 10BASE-T1L | Single port 100BASE-TX | Single port fieldbus |
|---|---|---|---|
PROFINET IO-Device |
|
|
|
EtherNet/IP Adapter |
|
|
|
Open Modbus/TCP |
|
|
|
EtherCAT Slave |
|
|
|
CC-Link IE Field Basic Slave |
|
|
|
POWERLINK Controlled Node |
|
|
|
Sercos Slave |
|
|
|
DeviceNet Slave |
|
|
|
CANopen Slave |
|
|
|
PROFIBUS DP Slave |
|
|
|
| File | Modified | |
|---|---|---|
|
ZIP Archive NXSLFWPNSV5_SPE_1-Port_V4.1.0.2.zip Compatible with netX Studio CDT V1.1110 |
2024-11-22 by Jin Zhao | |
|
ZIP Archive NXSLFWEISV5_SPE_1-Port_V5.0.2.0.zip Compatible with netX Studio CDT V1.1110 |
2024-11-22 by Jin Zhao |
The following evaluation firmware is included in the examples above. An official version can be downloaded from the Hilscher Knowledge Base with a separate license.
Protocol | Evaluation firmware | Official release firmware links |
|---|---|---|
PROFINET (PNS) | X190D002.nxi (Usecase C) | |
EtherNet/IP (EIS) | X190H002.nxi (Usecase C)
|
The NXEB 90-SPE evaluation board is delivered with only the HWC/MWC and an FDL file. No evaluation firmware(LFW) or maintenance firmware(MFW) is preinstalled, and no file system is available in the initial state.
A full format request (HIL_FORMAT_REQ 0x00001ED6) is required in case the LFW and MFW are downloaded and run for the first time. For more information, see https://hilscher.atlassian.net/wiki/x/GE6YC.
Alternatively, the Flasher tool can be used to write an empty file system (binary_dump) at offset 0x80000 of the SQI flash memory, as shown in the image below.
