Info |
---|
To begin, we assume that the NXHX 90-MC board is already preprogrammed. If you have any difficulties with programming, look for more detailed information on Confluence, or contact our service team. |
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
The PLC example compatible with your motor can be downloaded below: EMPAPST ECI4220K1B100 - PDRV-AC1-S1500-NETX90MC-WINCC-EMPAPTS-ECI4220K1B100-V1V4.0.0.10 MAXON ECI30 - PDRV-AC1-S1500-NETX90MC-WINCC-MAXON-ECI30-V1V4.0.0.10 |
Note |
---|
The PLC examples above are only compatible with PROFINET PROFIdrive_Example_AC1 V4.0.0.1. (Incompatible with PROFIdrive_Example_AC1_AC4- V4.1.0.0) If you are testing PROFIdrive AC1 with PROFIdrive_Example_AC1_AC4- V4.1.0.0, refer to the demo PDRV-AC1-S1500-NETX90MC-NIC52-V4.0.1.0 in the PLC Startup Guide based on NIC52-RE. |
Make the connections as shown in Figure 1.
...