Versions Compared

Old Version 2

changes.mady.by.user Jin Zhao

Saved on

compared with

New Version Current

changes.mady.by.user Jin Zhao

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

To begin, we assume that the NXHX 90-MC board is already preprogrammed. If you have any difficulties with programming, look for more detailed information on Confluence, or contact our service team.

Panel
panelIconId1f4c1
panelIcon:file_folder:
panelIconText📁
bgColor#E6FCFF

The PLC example compatible with your motor can be downloaded below:

EMPAPST ECI4220K1B100 - PDRV-AC1-S1500-NETX90MC-WINCC-EMPAPTS-ECI4220K1B100-V1V4.0.0.10

MAXON ECI30 - PDRV-AC1-S1500-NETX90MC-WINCC-MAXON-ECI30-V1V4.0.0.10

Note

The PLC examples above are only compatible with PROFINET PROFIdrive_Example_AC1 V4.0.0.1. (Incompatible with PROFIdrive_Example_AC1_AC4- V4.1.0.0)

If you are testing PROFIdrive AC1 with PROFIdrive_Example_AC1_AC4- V4.1.0.0, refer to the demo PDRV-AC1-S1500-NETX90MC-NIC52-V4.0.1.0 in the PLC Startup Guide based on NIC52-RE.

  1. Make the connections as shown in Figure 1.

...