Features - V2

Key Features

  • Device Level Ring (DLR) - Media Redundancy 1)
  • Address Conflict Detection (ACD)
  • QuickConnect (Fast Startup)
  • Connection Classes: 0, 1, 3
  • Connection Application Types: Exclusive Owner, Input Only, Listen Only Connections
  • Explicit Messaging
  • Quality of Service
  • Object model can be extended by implementing own CIP objects (necessary to support CIP profiles)
  • CIP Sync 1)

1) Supported by 2 port firmware variants only

Supported Protocols

  • TCP/IP, UDP/IP
  • DLR 1)
  • DHCP / BOOTP
  • IEEE 802.3
  • IEEE  802.1Q

1) Supported by 2 port firmware variants only

On this page


Technical Data

FeatureDescription
Maximum number of input data504 bytes per assembly instance
Maximum number of output data504 bytes per assembly instance
IO Connection Types (implicit)

Exclusive Owner, Listen Only,

Input only
IO Connection Trigger Types

Cyclic, minimum 1 ms*
Application Triggered, minimum 1 ms*
Change Of State, minimum 1 ms*

Explicit MessagesConnected and unconnected
Max. number of connections8 (sum of connected explicit and implicit connections)
Max. number of user specific objects20
Unconnected Message Manager (UCMM)supported
Predefined standard objects

Identity Object (0x01)
Message Router Object (0x02)
Assembly Object (0x04)
Connection Manager (0x06)
DLR Object (0x47) 1)
QoS Object (0x48)
TCP/IP Interface Object (0xF5)
Ethernet Link Object (0xF6)
Time Sync (0x43) 1)

DHCPsupported
BOOTPsupported
Baud rates10 and 100 MBit/s
Duplex modesHalf Duplex, Full Duplex, Auto-Negotiation
MDI modesMDI, MDI-X, Auto-MDIX
Data transport layerEthernet II, IEEE 802.3
Address Conflict Detection (ACD)supported
DLR (ring topology)supported 1)
Quick Connectsupported
Integrated switchsupported 1)
CIP Reset servicesIdentity Object Reset Service of Type 0 and 1

1) Supported by 2 port firmware variants only

Configuration

Configuration is done by sending packets to the stack or by using SYCON.net configuration database.

Diagnostic

The stack supports common diagnostic in the dual-port-memory for loadable firmware.