Hilscher Knowledge Base

netX

All content
Space settings

Results will update as you type.

netX family
Boards
•
Supported hardware components

/

/

Loadable Firmware (LFW) - Protocol Stacks

/

Does netX 90 LFW Marshaller support Ethernet communication.

Does netX 90 LFW Marshaller support Ethernet communication.

Owned by Former user (Deleted)

Last updated: 2019-03-19 by Jin ZhaoVersion comment

1 min read

Loading data...

Q

Does netX90 LFW Marshaller support Ethernet communication?

A

No, the Marshaller in netX 90 LFWs supports only UART based communication. There is no Ethernet connector implemented.

See also...

Page:

A Raspberry Pi supports multiple SPI signals, which ones are used for communication between RPi and netHAT?
Page:

Can other expansion HAT boards be used in combination with the netHAT?
Page:

Is other protocol fimware than PROFINET, EtherCAT and EtherNet/IP available for netHAT?
Page:

The SYS LED of netHAT flashing alternately yellow and green, is this normal?
Page:

How fast can be the data update cycle with an application running above netHAT?
Page:

Where can I find API documentation about the netHAT supported protocols?
Page:

Is there a 3D CAD model of the netHAT available?
Page:

A netX52 chip could support multiple communication channels at a time, does the netHAT support more than one channel?
Page:

Can I use netHAT with more than 32 bytes inputs or outputs?
Page:

Which operating systems does the netHAT support?
Page:

Which SD card size do I require?
Page:

Whom should I contact if I have technical questions relating to the netHAT?
Page:

Which power supply unit do I require?
Page:

Where can I find documentation and further information of the netHAT module?
Page:

Supported Flash Types netX100/500

{"serverDuration": 37, "requestCorrelationId": "e303affde57149789fc478c878d11cf4"}