Tape and Reel, Pick & Place Shipping

Owned by André Groß
Last updated: 2023-05-08 by Marcel Sommler
1 min read
Q
Could you provide information about netX ASIC production packaging option Tape and Reel?
A

Further information may be found in the standard EIA-481, which is used for taping.

Package sizeTape sizeReel sizeQuantity per reelOuter reel empty pocketInner reel empty pocket
144L LFBGAWidth: 24mm Diameter: 13inch 1500ea≥ 50ea≥ 50ea
10x10x1.4mm3Length: 81m Width: 24mmLeader: 70cmTrailer: 70cm
Q
Could you provide information about netX ASIC production packaging option Pick & Place?
A

Hilscher provides netX90 ASICs in the P&P packaging listed below. Please note: Hilscher has also made small boxes of QTY.15 available for convenience when producing small prototype builds, however these will need to be manually placed in your own tray.

BGABody SizeQuantity PocketsPer TrayMatrixRow-ColumnJEDECReference
10 x 10 mm24010 x 24CO-029AY
Q
Could you provide information about Tape and reel shipping netX 90?
A

QUANTITY ON REEL AND ORIENTATION

Device

Package

Pin Count

Carrier Tape

Quantity per Reel

Pin 1 Orientation

EI481 Standard

Width

Pitch

13“

netX 90

BGA 10 x 10

144

24mm

16mm

1500

See Figure

Quadrant 1


  1. Reference for Tape & Reel see EIA-481 standard
  2. Device orientation nearby carrier hole left:
    • Pin 1 located at upper left corner in user direction of unreeling

Legend EI481 Standard

Quadrant designations

1 = upper left

2 = upper right

3 = lower left

4 = lower right

See also...